STATUARIO BELLO (P) 1 ¼” SLAB

Interior: Yes
Floor: Yes
Wall: Yes
Exterior: No
Wet Area: Yes
Steam Shower: Yes
Pool: No
Traffic: Standard Commercial
Backsplash: Yes – Heat not to exceed 392° F
Fireplace Surround: Yes – Heat not to exceed 392° F
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

Density – ASTM C373 2.38 g/cm3
Bond Strength – ASTM C482 237 psi
Compressive Strength – ASTM C170 Dry: 23,700 psi / Wet: 22,100 psi
Thermal Expansion – ASTM C531 2.61×10-5 in/in F
Coefficient of Friction – ASTM- C-1028 Dry: 0.78 / Wet: 0.61
Flexural Strength – ASTM C880-09 8,700 psi
Weather Resistant – ASTM C217 No Damage
Modulus of Rupture – ASTM C99-09 9,300 psi
Bending Resistance – ASTM C648 480 lbs
Thermal Shock Resistance – ASTM C484 No Damage Passed 25 Cycles
Water Absorption – ASTM C97-09 0.02%
De-icing Resistance – ASTM C672 No Damage
Chemical Reagents Resistance – ASTM D543 No Damage
Izod Impact – ASTM D256 0.363 ft lbs/in
Specific Gravity – ASTM C97-09 148.3lbs/ft3
Wear Resistance – ASTM C501 139 lw
Mold Resistance – ASTM D6329 No microbial growth