2 – 7/8” X 36” BATTISCOPA ETIC PALISSANDRO

Interior: Yes
Floor: No
Wall: Yes
Exterior: Yes
Wet Area: Yes
Steam Shower: Yes
Pool: Yes
Backsplash: Yes
Fireplace Surround: Yes
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

Abrasion Resistance – ISO 10545-6 < 150 mm3
Barefoot Ramp Test – DIN 51097 A
Bond Strength – EN 12004 Class C2
Bond Strength – EN 1348 ³ 1.0 N/mm2
Breaking Strength – ISO 10545-4 S ³ 2000 N
Chemical Resistance – ISO 10545-13 Resistant
Coefficient of Thermal Linear Expansion – ISO 10545-8 ²7 MK-1
Coefficient of Friction – B.C.R.A. Rep. CEC/81 >0.40 Asciutto, >0.40 Bagnato
DCOF – ANSI A.137.1 > 0.42 Wet
Frost Resistance – ISO 10545-12 Resistant
Impact Resistance – ISO 10545-5 ³ 0.55
Bending Resistance – ISO 10545-4 R ³ 45 N/mm2
Scratch Resistance (MOHS) – EN 101 MOHS 6
Moisture Expansion – ISO 10545-10 ² 0.01% (0.1mm/m)
Reaction to Fire – N/A A1 – A1fl
Regularity of Length & Width – ISO 10545-2 ± 0,9 (*) ± 0,6 (*) ± 2,0 (*) ±0.3% ±1.0mm
Regularity of Rectangularity – ISO 10545-2 ± 0,75 (****) ± 0,5 (****) ± 2,0 (****) ±0.3% ±1.5mm
Regularity of Straightness of Sides – ISO 10545-2 ± 0,75 (***) ± 0,5 (***) ± 1,5 (***) ±0.3% ±0.8mm
Resistance to Household Chemicals – ISO 10545-13 UA
Resistance to Swimming Pool Salts – ISO 10545-13 UA
Booted Ramp Test – DIN 51130 R9
Surface Flatness – ISO 10545-2 ±0.4% ±1.8mm
Water Absorption – ISO 10545-3 ²0.1%
Water Absorption – ASTM C373-18 ²0.5%