fbpx

1” X 4” HERRINGBONE TURKISH GRAY (H)

SHARE

AKDO's Turkish Gray tiles are a great complement to gray veined white stones, paler grays, and also sublime on its own thanks to its nuanced variation of soft gray tones.

Product name: 1” x 4” Herringbone Turkish Gray (H)
Part number: MB1266-HB14H0
Availability: In Stock
Dimensions: 9'' x 11.5'' = .72 sqft
Thickness: 3/8"
Grout joint recommendation: 1/8"
Color: Gray
Color variation: High
Finish: Honed
Material: Stone,Marble
Due to the inherent characteristics of natural stone, there may be variations in color, movement and texture from lot to lot.

Micro pits or scratches may appear white, therefore using a complimentary gray grout is recommended.

It is important to properly seal marble used in a shower/steam shower, and maintain the sealant regularly to ensure water beads off the tile.

Interior: Yes
Floor: Yes
Wall: Yes
Exterior: No
Wet Area: YES – when properly sealed
Steam Shower: YES – when properly sealed
Pool: No
Traffic: Standard Commercial
Backsplash: Yes
Fireplace Surround: Yes
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

DCOF – ANSI A.137.1 Due to the natural characteristics and variation in natural stone, slip resistance will vary. Such factors are dependent on lots, finish and the topical sealant applied. There is currently no standard industry test with the ability to measure the exact slip resistance.

In order to reduce the slipperiness of stone surfaces, AKDO suggests selecting a Non-Polished finish such as Honed, Sandblasted, or Textured stone, or choosing a mosaic, as the grout joints in the stone result in an increase of friction.

Newsletter