AKDO is thrilled to present Mark, a unique floor and wall tile with a look inspired by five different surface coverings. Subtle influences of textures ranging from cement, resin, wood, marble and oxidized metal are seen in the movement of these contemporary tiles. The end result is a stylish European vibe.

Product name: Esagono Mark Tobacco (M)
Part number: PO1867-ESAG00
Availability: Available Upon Request
Dimensions: 1pc=30cm X 35cm=1.13sqft
Thickness: 3/8"
Grout joint recommendation: 1/16"
Color: Brown
Finish: Matte
Material: Porcelain
Origin: Italy
Due to the inherent characteristics of porcelain, there may be variations in color, movement and texture from lot to lot.

Interior: 1
Floor: Yes
Wall: Yes
Exterior: 1
Wet Area: Yes
Steam Shower: Yes
Pool: Yes
Traffic: Heavy Commercial
Backsplash: Yes
Fireplace Surround: Yes
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

Abrasion Resistance – ISO 10545-6 ² 150 mm3
Barefoot Ramp Test – DIN 51097 A
Bond Strength – EN 12004 Class C2
Bond Strength – EN 1348 ³ 1.0 N/mm2
Breaking Strength – ISO 10545-4 S ³ 1500 N
Chemical Resistance – ISO 10545-13 A
Coefficient of Thermal Linear Expansion – ISO 10545-8 ²7 MK-1
Coefficient of Friction – B.C.R.A. Rep. CEC/81 >0.40 Asciutto, <0.40 Bagnato
DCOF – ANSI A.137.1 > 0.42 Wet
Frost Resistance – ISO 10545-12 Resistant
Impact Resistance – ISO 10545-5 ³ 0.55
Bending Resistance – ISO 10545-4 R ³ 40 N/mm2
Moisture Expansion – ISO 10545-10 ² 0.01% (0.1mm/m)
Reaction to Fire – N/A A1 – A1fl
Regularity of Length & Width – ISO 10545-2 ± 0.2% ± 0.8 mm
Regularity of Rectangularity – ISO 10545-2 ± 0.2 % ± 0.8 mm
Regularity of Straightness of Sides – ISO 10545-2 ± 0.2 % ± 0.8 mm
Resistance to Household Chemicals – ISO 10545-13 A
Resistance to Swimming Pool Salts – ISO 10545-13 A
Surface Flatness – ISO 10545-2 ± 0.3 % ± 1.3 mm
Water Absorption – ISO 10545-3 ²0.1%
Water Absorption – ASTM C373-18 ²0.5%