Mark floor tiles are made from porcelain and are available in six neutral colors. Whites, silvers and rich gray tiles come in matte, textured and honed finishes. Honed tiles appear sleek and shiny, while the Matte tiles are more organic looking. All tiles are rectified allowing for a 1/16” grout joint, creating a seamless installation with minimal grout joints.
Product name: 2 7/8” x 24” Mark Clay Battiscopa (M)
Part number: PO1863-BATTM0
Availability: Available Upon Request
Grout joint recommendation: 1/16"
Color variation: Medium
Available in Northern CA, CT, DE, ME, MA, NH, NJ, NY, PA, RI, VT
Due to the inherent characteristics of porcelain, there may be variations in color, movement and texture from lot to lot.
Exterior – Freeze/thaw: Yes
Wet Area: Yes
Steam Shower: Yes
Fireplace Surround: Yes
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.
Regularity of Length & Width: ± 0.2% ± 0.8 mm
Regularity of Straightness of Sides: ± 0.2 % ± 0.8 mm
Regularity of Rectangularity: ± 0.2 % ± 0.8 mm
Surface Flatness: ± 0.3 % ± 1.3 mm
Breaking Strength: S ³ 1500 N
Impact Resistance: ³ 0.55
MOHs Hardness: MOHS 6
Coefficient of Thermal Linear Expansion: ²7 MK-1
Moisture Expansion: ² 0.01% (0.1mm/m)
Reaction to Fire: A1 – A1fl
Chemical Resistance: A
Resistance to Household Chemicals: A
Resistance to Swimming Pool Salts: A
DCOF: > 0.42 Wet