Designer: Karen Berkemeyer Home



Play with patterns your way with AKDO's Heritage Blend porcelain, which take cues from historic encaustic tiles.

Product name: Heritage Hexagon Blend 2 (M)
Part number: PO1902-HEXA01
Availability: In Stock
Dimensions: 10.60'' x 9.00'' = .494 sqft
Thickness: 3/8"
Grout joint recommendation: 1/8"
Color: Gray
Color variation: Low
Finish: Matte
Material: Porcelain
Origin: Italy
Available Nationwide.

Due to the inherent characteristics of porcelain, there may be variations in color, movement and texture from lot to lot.

Interior: Yes
Floor: Yes
Wall: Yes
Exterior: Yes
Wet Area: Yes
Steam Shower: Yes
Pool: Yes
Traffic: Light Commercial
Backsplash: Yes
Fireplace Surround: Yes
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

Slip Resistance – UNI ENV 12633 Class 1
Barefoot Ramp Test – DIN 51097 Class A
Breaking Strength – ISO 10545-4 > 1300 N (³ 7.5mm) > 700 N (< 7.5mm) Compliant
Chemical Resistance – ISO 10545-13 Guaranteed (GA GLA GHA)
Coefficient of Thermal Linear Expansion – ISO 10545-8 Test Method Available
Crazing Resistance – ISO 10545-11 Resistant
DCOF – ANSI A.137.1 > 0.42 (actual score .68)
Frost Resistance – ISO 10545-12 Resistant
Bending Resistance – ISO 10545-4 > 35 N/mm2 (³ 7.5mm) Compliant
Scratch Resistance (MOHS) – EN 101 ³5
Reaction to Fire – EN 13501-1 A1 FL -A1
Regularity of Length & Width – ISO 10545-2 ± 0.6% Compliant
Regularity of Rectangularity – ISO 10545-2 ± 0.5% Compliant
Regularity of Straightness of Sides – ISO 10545-2 ± 0.5% Compliant
Surface Flatness – ISO 10545-2 ± 0.5%
Water Absorption – ISO 10545-3 ² 0.5% Compliant
Colour Resistance to Light – DIN 510914 Resistant
Lead and Cadmium Given Off – UNI-EN ISO 10545-15 Test Method Available

MR – Building product disclosure and optimization – sourcing of raw materials: pre-consumer 45% recycled content